SAFEWELL campus building at the China tool cabinet production base
China Factory Since 1998

Tool Cabinet Manufacturer & Supplier in China

SAFEWELL is a tool cabinet manufacturer in China, operating since 1998 (28 years) from a 16,000 m² production base under ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018. The factory supplies rolling tool cabinets, tool carts, workbenches, and workstations to overseas brands, distributors, and project buyers.

Last updated: 17 November 2026

Buyer snapshot

Company Facts for This Tool Cabinet Manufacturer

These are the company figures a buyer can use before opening a model page. Model sizes, loads, and packing stay on the product pages linked below.

Founded
1998
Employees
8,000+
Production base
16,000 m²
On-time delivery
98.7%
Export markets
80+ countries
Patents
50+
Standard MOQ
One 20GP container. Mixed models are allowed.
Trials and stock
Small trial orders are accepted. Many models are in stock, and single units can be purchased.
Samples
Charged. About 10 days.
Mass production
About 30 days.
Warranty
2 years
DDP door-to-door
USA, Canada, Europe, Australia and New Zealand, and South America.

Private-label and custom programs are on the OEM/ODM page.

Platforms

Compare Published Tool Cabinets, Tool Chests, and Tool Carts

Sizes, drawer counts, and loads are copied from the product pages. A dash (—) means that page does not publish the field. Inches are used where the product page prints inches. LZ and STRB rows use inches converted from published mm, and each of those sizes is labeled “converted from published mm”.

Rolling cabinets, tool chests, and the tool cart

Seven published platforms. LZ and STRB inches are converted from published mm. A dash (—) means the product page does not publish that field.
Type Model Published size Drawers Published load Slides / other
Rolling cabinet LZ001 27.0W (+3.7 handle) × 18.9D × 38.6H in, converted from published mm (685+95)×480×980 mm — 350 kg 100 lb slides; 5×2 in casters, 2 with brakes
Smart cabinet STRB5624W120 56.0W × 24.0D × 46.7H in, converted from published mm 1422×610×1185 mm 12 (page text) up to 700 kg (page text) 100 lb / 45 kg per drawer; 30 mm density-board worktop; PDU
Heavy-duty cabinet LZ002-02 56.4W × 26.0D × 46.5H in, converted from published mm 1433×660×1180 mm 15 up to 690 kg (page text) 100 lb slides, optional 150 lb; T1.2/T1.5
Wide cabinet LZ002-03 47.6W × 29.8D × 36.5H in, converted from published mm 1209×757×928 mm 12 up to 700 kg (page text) 6 in silent swivel casters
Compact cabinet LZ002-04 39.1W × 26.0D × 42.0H in, converted from published mm 994×660×1066 mm 8 — Tubular lock with numbered keys
Slim cabinet LZ002-05 32.2W × 18.1D × 42.0H in, converted from published mm 819×460×1066 mm 8 — Heavy-duty 5 in casters; lighting and PDU
Mobile tool cart LZ002-06 32.2W × 18.1D × 38.7H in, converted from published mm 819×460×982 mm 6 up to 615 kg (page text) —

LZ002-04 and LZ002-05 print “-” in the Load field, so those load cells stay blank here. LZ002-06 lists a total capacity up to 615 kg in the feature list, and it does not publish a slide rating or a caster size. STRB5624W120 and LZ002-02 print the total capacity in the feature list. The STRB5624W120 drawer count is in the page text, not in a drawers specification row.

Chest and cabinet series, representative models

Each series links to its product page for the full SKU list. Inches below are the sizes those pages print. A photo note means the drawer count is the count the product page takes from the catalog photo.

Representative models only. Open the series page for every SKU. A dash (—) means the product page does not publish that field.
Series Representative models Cabinet / combo size (in) Drawers (as published) Slides
Economy 26 in XTB220 / TC261604A / TC271805B Cabinet 24.3W*13D*26H (XTB220); rolling cabinet TC271805B 29.7W*18.3D*33H Chest 4 or 6; cabinet 5 (XTB220: chest 4 + cabinet 2) 75 lb
Economy 36 in TC361804A / TC361805B Chest 35.6W*17.7D*24.8H; cabinet 36W*18.1D*37.8H Chest 4 or 6; cabinet 5 75 lb
Economy 42 in XTB4204A / XTB4209B Chest 41.5W*17.7D*23.4H; cabinet 42W*18.1D*42.1H Chest 4 or 6; cabinet 9 75 lb
Economy 46 in TC461804A / TC461808B Chest 45.5W*17.7D*22.4H; cabinet 46W*18D*37.1H Chest 4 or 6; cabinet 8 100 lb
Economy 52 in TC521804A / TC521807B Chest 51.6W*17.8D*24.8H; cabinet 52W*18.1D*37.6H Chest 4 or 6; cabinet 7 100 lb
Heavy Duty 26 in XTB2606 / XTB2707 Chest 26.1W*16D*14.6H; cabinet 26.9W*18.1D*31.5H Chest 6 (photo); cabinet 7 (photo) 100 lb
Heavy Duty 36 in XTB73605A / XTB73605B+EB01 Chest 35.4W*17.5D*22.7H; cabinet 36W*18D*40.5H Chest 5 (photo); cabinet 5 + lower storage (photo) 100 lb
Heavy Duty 42 in TC421804AHMC / TC421809BHMC Chest 41.6W*17.8D*22.4H; cabinet 42W*18.1D*30.9H Chest 4 (photo); cabinet 9 (photo) 100 lb
Heavy Duty 62 in SW6205A / SW6207B-P Chest 61.5W*21.5D*26.7H; cabinet 62W*22D*45.2H — 100 lb
Industrial combo TC602608A / TC602610B 60W*26D (chest 25H / cabinet 44.6H); also 72W*30D models Chest 8 (photo); cabinet 10 (photo) 120 lb
Industrial mobile cabinet XTB6109B / XTB7215B / XTB9624B 61W / 72W / 96W *20D*37.8H 9 / 15 / 24 (photo) 100 lb, EVA liners

Workbenches and workstations stay off these tables. Published workbench specifications are on the workbench manufacturer page.

Equipment

Machines Behind a Tool Cabinet Supplier

SAFEWELL cuts, bends, welds, punches, and powder-coats tool cabinets on German TRUMPF and Japanese AMADA machinery. The specifications in the table are the figures already published on the homepage.

A rolling tool cabinet moves through that sequence as sheet, then as formed panels, then as a welded body, then as a coated and assembled unit. Keeping those steps in one 16,000 m² production base is how repeat orders stay on the same process path. Company background, including the 50+ patents and the 80+ countries already served, is summarized on the About page. Buyer facts, published model specifications, and order terms are on the Company Facts page.

CNC press brake forming sheet metal panels for tool cabinets

CNC Press Brakes

Nominal force 1300KN. Bending accuracy +0.1. Feeding accuracy ±0.08mm. Material processing range 0.6-2.0mm.

Welding machine used to join tool cabinet frames and drawer bodies

Welding

Nominal pressure 450KN. Column distance 500mm. Welding is the step that fixes cabinet geometry before coating and assembly.

Laser cutting machine processing sheet metal for tool cabinet parts

Laser Cutting

Cutting accuracy ±0.03mm. Published capacities: carbon steel 20mm, stainless steel 6mm, aluminum 4mm.

Punch press forming holes and features in cabinet sheet metal

Punch Presses

Published material range: carbon steel, stainless steel, and aluminum. Punching prepares holes and formed features before bending.

Powder coating line finishing tool cabinet panels

Powder Coating

An automatic powder coating line and a manual powder coating line. Finish color and texture are set here before assembly.

Published equipment specifications
Process Published specification
CNC press brakes 1300KN nominal force; bending accuracy +0.1; feeding accuracy ±0.08mm; material range 0.6-2.0mm
Welding 450KN nominal pressure; 500mm column distance
Laser cutting Accuracy ±0.03mm; carbon steel 20mm; stainless steel 6mm; aluminum 4mm
Punch presses Carbon steel, stainless steel, and aluminum
Powder coating Automatic powder coating line and manual powder coating line
SAFEWELL workshop floor where tool cabinets move through fabrication and assembly
Production

How a Cabinet Moves Through the Workshop

A SAFEWELL tool cabinet is checked, cut, punched, bent, welded, powder-coated, and assembled with slides, locks, and casters in one workshop. The same path covers a catalog rolling cabinet and an OEM finish change on an existing platform. The commercial steps are on the OEM/ODM program page.

Delivery planning starts once the scope and the sample are confirmed. The published on-time delivery record for that planned flow is 98.7%.

Familiar application settings already described on the site include auto repair workshops, industrial maintenance, manufacturing workstations, dealer programs, and custom OEM projects. The factory builds the storage around those uses: rolling cabinets for the bay, mobile carts for the floor, and workbenches where the cabinet is also the work surface.

Tool chests and toolboxes

SAFEWELL as a Tool Chest Manufacturer

A tool chest manufacturer is the factory a distributor calls when the order is a top chest, a rolling bottom cabinet, or the two stacked as one set. SAFEWELL builds those pieces in the same shop as its tool cabinets. Buyers who say tool chest and buyers who say tool cabinet are often describing one family: steel drawers, a lock, casters on the rolling unit, and a published size. SAFEWELL can make tool chests and toolboxes as well as tool cabinets and carts.

Start with the Heavy Duty group when the program is a dealer chest rather than a single rolling cabinet. The Heavy Duty rolling tool cabinet page lists the narrow pair XTB2606 and XTB2707. XTB2606 is the top chest. XTB2707 is the rolling bottom. The 36 inch Heavy Duty tool chest and cabinet adds the side locker EB01. The 42 inch Heavy Duty tool chest and cabinet is the wider pair in that series. For a wide bay, the 62 inch tool chest lists top chest SW6205A over rolling cabinet SW6207B-P. SW6205A lists gas struts, a pegboard inside the lid, and side handles. SW6207B-P is the rolling bottom, and the catalog lists its casters. Those two are a chest-and-cabinet combo, not the XTB6210 mobile work stations.

Tool Box Manufacturer for Top Chests and Shop Boxes

A tool box manufacturer, in the way overseas buyers use the words, is the same factory asked for the top box that sits on a cabinet and for the boxes sold beside it. SAFEWELL can make toolboxes and tool chests for that assortment. Economy widths are published as separate wholesale pages so a buyer can match a chest without treating every width as one SKU.

Industrial widths are a separate group. Combos TC602608A, TC602610B, TC723010A, and TC723016B are on the industrial tool chest and cabinet page. The wider rolling cabinets XTB6109B, XTB7215B, and XTB9624B are on the industrial mobile tool cabinet page. The stainless steel work station page is the SS430 set, and it should not be quoted as a painted toolbox.

Rolling cabinets that buyers also call chests stay in the same offer. The LZ001 professional rolling tool cabinet, the STRB5624W120 fingerprint cabinet, and the 15-drawer LZ002-02 are compared on the rolling tool cabinet page. A program that needs a work surface as well as a chest should use the custom workbench factory page, or the mobile workbench comparison, rather than forcing a bench into a chest line. Color, lock, logo, and carton marking follow the OEM/ODM path. The standard order is one 20GP container and mixed models are allowed. Small trial orders are accepted, many models are in stock, and single units can be bought.

LZ001 rolling tool chest with drawers, a side handle, and casters
Supplier checks

Choosing a Tool Cabinet Supplier in China

Choose a tool cabinet supplier in China by matching the factory record, the machines, the certificates, and the published cabinet specs before you compare price. SAFEWELL publishes those checks on this site so a buyer can verify them without a private data room.

  1. 1. Factory record

    Confirm production since 1998, the 16,000 m² base, 50+ patents, buyers in 80+ countries, and the 98.7% on-time delivery record.

  2. 2. Machines

    Confirm German TRUMPF and Japanese AMADA equipment, plus laser cutting, CNC bending, welding, punching, and powder coating, with the specifications listed above.

  3. 3. Certificates and gates

    Confirm ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018, then the sequence IQC, IPQC, coating QC, functional test, FQC, and OQC.

  4. 4. Published product and OEM path

    Match steel, slides, casters, locks, and load to a catalog model, then use the OEM/ODM page for private label, full development, or contract manufacturing.

Product Lines

Cabinets, Carts, Workbenches, and Workstations

SAFEWELL manufactures rolling tool cabinets, mobile tool carts, workbenches, and workstations. The model-by-model comparison is on the rolling tool cabinet page. Work surfaces are compared on the mobile workbench page. A request for a tool chest manufacturer or a tool box manufacturer maps to those rolling tool cabinets and rolling tool chests. SAFEWELL makes toolboxes and tool chests as well as tool cabinets and carts.

  • Steel: cold-rolled steel from T0.8 to T1.5
  • Drawer slides: 100lb (45kg) per drawer, with an optional 150lb slide on some heavy-duty layouts
  • Total load: 300kg on the mobile service workbench to 1300kg on the flagship workstation

The full range is on the products page. The four cards below use white-background product photographs and link to the model shown. Related models are linked in the notes.

Further published models, the application notes for those layouts, and related buyer articles are grouped below.

LZ001 professional rolling tool cabinet in red, with casters and a side handle, photographed on white

Tool Carts

The LZ001 professional rolling tool cabinet is the rolling tool chest buyers specify when they want a mobile cabinet: T1.0/T1.5 cold-rolled steel, 100lb ball-bearing slides, and a published 350kg total capacity. The dedicated LZ002-06 mobile tool cart is the 6-drawer shop-floor cart, with a published total capacity up to 615kg.

Flagship heavy-duty workstation with side lockers, top chests, pegboard, and a drawer cabinet, photographed on white

Workstations

The flagship workstation combines side lockers, triple top chests, a pegboard, and a 21-drawer base. Published material is T0.8-T1.2 cold-rolled steel, and published total capacity is 1300kg.

Quality Control

Six Gates From Incoming Steel to Shipment

SAFEWELL checks every tool cabinet in six steps before shipment: IQC, IPQC, coating quality control, functional test, FQC, and OQC.

  1. IQC verifies incoming steel and components.
  2. IPQC checks dimensions and structure during forming, welding, and assembly.
  3. Coating QC tests adhesion, thickness, and corrosion resistance.
  4. Functional test checks drawers, casters, and locks.
  5. FQC is the visual and structural check of the finished unit.
  6. OQC confirms the unit and the export pack. Honeycomb cartons are drop-tested to an ISO standard.

Buyers comparing suppliers can read the same gates against the tool box manufacturer qualification guide, the OEM tool cart supplier audit checklist, the tool cabinet manufacturer audit checklist, and the notes on switching tool cabinet suppliers.

Incoming quality control inspection of steel and components before cabinet production

1. IQC

Incoming quality control verifies the steel and components against the specification before cutting starts.

In-process quality control check during tool cabinet fabrication

2. IPQC

In-process checks cover dimensional accuracy and structural integrity through forming, welding, and assembly.

Coating quality control test for powder-coated tool cabinet panels

3. Coating QC

Coating quality control tests adhesion, thickness, and corrosion resistance after the powder coat line.

Functional test of drawers, casters, and locks on an assembled tool cabinet

4. Functional Test

Assembly functional control tests moving parts: drawers, casters, and locks.

Final quality control inspection of a finished tool cabinet before packaging

5. FQC

Final quality control is a complete visual and structural check of the finished unit before it leaves the line.

Outgoing quality control of packaged tool cabinets before export shipment

6. OQC

Outgoing quality control confirms the finished unit and the export pack before shipment. Reinforced honeycomb packaging is drop-tested to an ISO standard.

Certifications

ISO Systems That Govern the Factory

SAFEWELL’s published certifications are ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018. They govern quality, environment, and occupational health and safety across the six inspection gates.

Published certifications
Standard Scope
ISO 9001:2015 Quality management
ISO 14001:2015 Environmental management
ISO 45001:2018 Occupational health and safety
ISO 9001:2015 quality management certificate for SAFEWELL
ISO 9001:2015 quality management
ISO 14001:2015 environmental management certificate for SAFEWELL
ISO 14001:2015 environmental management
ISO 45001:2018 occupational health and safety certificate for SAFEWELL
ISO 45001:2018 occupational health and safety
OEM Summary

Six Steps, Then the Options You Can Specify

Yes. SAFEWELL offers OEM and ODM tool cabinets through six steps: requirement brief, technical proposal, sample validation, pilot run, mass production, and delivery support. The three cooperation models are private-label OEM, full ODM development, and contract manufacturing. Service detail and the RFQ checklist are on the OEM/ODM page.

Private-label work usually starts from a platform such as the LZ001 rolling cabinet or an LZ002 layout, then changes finish, lock, logo, and packaging. Full ODM adds structure, locking architecture, caster setup, and electrical modules, with a prototype before mass production. Contract manufacturing is the route for a released SKU that needs stable batches and shipment coordination.

  1. 01

    Requirement Brief

    Target market, dimensions, lock preference, power-module need, and the order plan are collected before a route is chosen.

  2. 02

    Technical Proposal

    The team returns a product route, the customization that fits an existing platform, and a preliminary quotation.

  3. 03

    Sample Validation

    Structure, finish, caster system, lock, and branding are confirmed on a sample before volume is committed.

  4. 04

    Pilot Run

    A small batch checks process capability, assembly quality, and packaging before the full release.

  5. 05

    Mass Production

    Released batches run with the IQC-to-OQC gates and lot traceability for that order.

  6. 06

    Delivery Support

    Shipment files, the loading plan, and post-delivery feedback set the baseline for the next order.

Customization options on existing platforms
Option What buyers can specify
Colors Standard palettes, custom color, texture, and gloss
Drawers 7 to 13 drawers, including mixed-width columns and the top compartment ratio
Lock types Recessed standard lock, or a smart lock with keypad and fingerprint
Logo Badge area, logo plate, carton marking, and instruction artwork
PDU and USB Side-mounted PDU plus USB, with US, UK, EU, or AU outlet standards
Casters Caster material, brake type, wheel size, and load matching
Commercial Planning

MOQ and Lead Time Follow the Process

SAFEWELL's minimum order is one 20GP container, and buyers can mix tool cabinets, tool carts, workbenches and other models in the same container. SAFEWELL accepts small trial orders so new buyers can check quality and packaging before a full container order. SAFEWELL samples are paid. A sample takes about 10 days to make. SAFEWELL mass production takes about 30 days. The published on-time delivery record is 98.7%.

A private-label program on an existing rolling cabinet, limited to color, logo, lock package, and carton marking, is quoted differently from full ODM work that needs new tooling, a new structure, or electrical integration. Selected items can be discussed as trial orders. The quotation states the quantity for that scope.

Lead time is planned in the same order as the six steps: requirement brief, technical proposal, sample validation, pilot run, mass production, and delivery support. Delivery planning starts when the scope is locked and the sample is confirmed, so pilot and mass-production timing stay visible before shipment. An existing-platform OEM project usually moves faster than full ODM development, because the schedule has to match customization depth. A change to structure, power module, or packaging resets the schedule. The published delivery record attached to that planning is 98.7% on time.

Export packaging is part of the same plan. Cartons are reinforced honeycomb packs, and the factory conducts ISO-standard drop tests before shipment. Documentation that travels with the batch includes the specification, packaging details, inspection records, and shipment files, so the next order starts from a confirmed baseline.

FAQ

Questions Buyers Ask a Tool Cabinet Manufacturer

Buyers usually ask how to choose a tool cabinet manufacturer in China, how to verify the supplier, and whether OEM and ODM cabinets are available. The answers below use factory facts already published on this site.

How do I choose a tool cabinet manufacturer in China?

Choose a tool cabinet manufacturer in China by confirming the factory, the machines, the quality system, and the product platforms before comparing price. SAFEWELL has manufactured since 1998 (28 years) from a 16,000 m² production base, supplies buyers in 80+ countries, holds 50+ patents, and publishes a 98.7% on-time delivery record. The plant runs laser cutting, CNC bending, welding, punching, and powder coating on German TRUMPF and Japanese AMADA machinery, under ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018.

How to verify a tool cabinet supplier?

Verify a tool cabinet supplier by matching published equipment, inspection gates, and certificates to the cabinet you intend to buy. SAFEWELL publishes CNC press brake, laser, welding, punch press, and powder coating specifications, and inspects each cabinet through IQC, IPQC, coating quality control, functional testing, FQC, and OQC. Export packs use reinforced honeycomb cartons with ISO-standard drop tests.

Does SAFEWELL offer OEM/ODM tool cabinets?

Yes. SAFEWELL offers OEM and ODM tool cabinets. Private-label and custom programs are on the OEM/ODM page.

What is the MOQ and lead time for a SAFEWELL tool cabinet?

SAFEWELL's minimum order is one 20GP container, and buyers can mix tool cabinets, tool carts, workbenches and other models in the same container. SAFEWELL accepts small trial orders so new buyers can check quality and packaging before a full container order. SAFEWELL samples are paid. A sample takes about 10 days to make. SAFEWELL mass production takes about 30 days.

What certifications does SAFEWELL hold?

SAFEWELL operates under ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018. Those systems cover quality management, environmental management, and occupational health and safety, and they sit over the six inspection gates from incoming steel to outgoing shipment. SAFEWELL also holds UL, CE, and SGS certifications.

What can I customize on a SAFEWELL tool cabinet?

You can customize color and finish, a layout of 7 to 13 drawers, lock type, logo placement, a side-mounted PDU with USB, and the caster package. Lock choices are a recessed standard lock or a smart lock with keypad and fingerprint. PDU outlet standards are US, UK, EU, or AU.

What is the difference between a SAFEWELL tool cabinet, tool chest, and tool cart?

SAFEWELL tool cabinets, rolling tool chests, and tool carts are the rolling cabinet platforms already in the catalog. SAFEWELL makes toolboxes and tool chests as well as tool cabinets and carts. Examples include the LZ001 professional rolling tool cabinet, the STRB5624W120 smart fingerprint tool cabinet, the LZ002-02 heavy-duty 15-drawer cabinet, and the LZ002-06 mobile tool cart. Workbenches and workstations are separate published lines.

Is SAFEWELL a tool chest manufacturer?

Yes. SAFEWELL is a tool chest manufacturer for the rolling tool chests and rolling tool cabinets in the catalog, including the LZ001 at 350KG, the 12-drawer STRB5624W120, and the LZ002 drawer cabinets. SAFEWELL makes toolboxes and tool chests as well as tool cabinets and carts.

Is SAFEWELL a tool box manufacturer?

Yes. SAFEWELL is a tool box manufacturer for the top chests, rolling cabinets, and chest-and-cabinet sets in the catalog. The Heavy Duty pair is XTB2606 and XTB2707. The 62 inch tool chest is SW6205A on rolling cabinet SW6207B-P. Economy widths from 26 inch to 52 inch are published on their own pages. SAFEWELL makes toolboxes and tool chests as well as tool cabinets and carts.

Can a tool chest and a toolbox share a container with workbenches?

Yes. Mixed models are allowed in one 20GP container, so a tool chest, a toolbox, and a workbench can share a shipment. Chest scope starts on the Heavy Duty tool chest pages and the 62 inch chest page. Workbench scope is on the workbench manufacturer page. Small trial orders are accepted, many models are in stock, and single units can be bought.

How do I choose a tool cabinet supplier in China?

Choose a tool cabinet supplier in China by checking the factory record, the machines, the ISO certificates, the inspection sequence, and the published cabinet specs before price. SAFEWELL has manufactured since 1998 from a 16,000 m² base, runs TRUMPF and AMADA equipment, and inspects each cabinet from IQC through OQC.

What steel thickness and load rating should I expect?

Published SAFEWELL constructions use cold-rolled steel from T0.8 to T1.5, with drawer slides rated 100lb (45kg) per drawer. Published total loads run from 300kg on the mobile service workbench to 1300kg on the flagship workstation. Some heavy-duty layouts also list an optional 150lb slide.

Where does SAFEWELL deliver tool cabinets on DDP terms?

SAFEWELL offers DDP door-to-door delivery to the USA, Canada, Europe, Australia and New Zealand, and South America. A mixed 20GP container of tool cabinets, tool chests, and workbenches can be planned as one delivery.

What warranty does SAFEWELL publish for tool cabinets?

SAFEWELL publishes a 2-year warranty. The warranty terms for a given program are confirmed with the quotation.

SAFEWELL exhibition booth with rolling tool cabinets displayed for visiting buyers

Plan the Next Cabinet Program With the Factory

Start an OEM project by sending the target market, drawer layout, lock, color, logo, and power-module standard. SAFEWELL matches the request to private-label OEM, full ODM development, or contract manufacturing.

REQUEST OEM PROJECT