SAFEWELL SW6205A top chest stacked on the SW6207B-P rolling cabinet in blue, with the lid open to the pegboard
Heavy Duty

62 Inch Heavy Duty Tool Chest and Cabinet

Wholesale buyers use this page for the 62 inch tool chest and the rolling cabinet that sits under it. A distributor looking for a 62 inch tool box in this width orders SW6205A and SW6207B-P as a tool chest and cabinet combo. SW6205A is the top chest at 61.5W*21.5D*26.7H in (1562*546*678 mm). It lists 2 gas struts, a pegboard inside the lid, and side handles. SW6207B-P is the rolling bottom cabinet at 62W*22D*45.2H in (1575*559*1148 mm). It lists large lower storage, a side compartment, and 5x2 in casters (2 fixed and 4 swivel with brake). Both list slides at 100 lbs each. The photograph is blue and shows full-width bar pulls. Pull material is not stated. These models are not the XTB6210 mobile work stations.

SW6205A packs at 75 pieces per 40HQ in 64.7W*25.4D*33.7H in (1643*645*856 mm). SW6207B-P packs at 50 pieces per 40HQ in 65.1W*24.8D*48.1H in (1654*630*1222 mm). Chest and cabinet loaded together are 30 sets per 40HQ. Both cartons are larger than the product, and neither model is marked knocked down. Millimeters are the inch sizes converted to the nearest millimeter. The catalog row for SW6207B-P is titled Tool Chest. It is the rolling bottom cabinet. Drawer count, steel gauge, unit weight, caster load, and total capacity are not listed. The hero is the stacked photograph of SW6205A on SW6207B-P. The chest crop and the cabinet crop are cut from that same photograph, and each crop still shows part of the other component. SAFEWELL was founded in 1998. The minimum order is one 20GP container, and mixed models are allowed. Paid samples take about 10 days. Mass production takes about 30 days. Many models are in stock, and single units can be purchased. DDP door-to-door delivery covers the USA, Canada, Europe, Australia, New Zealand, and South America. On-time delivery is 98.7%.

Models on this page: SW6205A, SW6207B-P.

Models

2

Width

61.5–62 in

62 Inch Heavy Duty Tool Chest Specs

Every value below is taken from the catalog listing for that model. Empty cells are empty on purpose.

Published specifications for 62 Inch Heavy Duty Tool Chest and Cabinet
Model Product typeProduct size (in)Product size (mm)Packing sizeQty per containerDrawer slidesCastersFinishOther specs
SW6205A Top tool chest61.5W*21.5D*26.7H1562*546*67864.7W*25.4D*33.7H in (1643*645*856 mm)75 pcs/40HQ100 lbs eachBlue (photo)2 gas struts; pegboard inside lid; side handles; full-width bar pulls shown in the photo
SW6207B-P Bottom tool cabinet (rolling)62W*22D*45.2H1575*559*114865.1W*24.8D*48.1H in (1654*630*1222 mm)50 pcs/40HQ; mixed with SW6205A, 30 sets/40HQ100 lbs each5x2 in, 2 fixed + 4 swivel with brakeBlue (photo)Large lower storage; side compartment shown in the detail photo; full-width bar pulls shown in the photo

Published Configuration

  • SW6205A is the top chest, 61.5 in wide, with 2 gas struts, a pegboard inside the lid, and side handles
  • SW6207B-P is the rolling bottom cabinet, 62 in wide, with large lower storage and a side compartment
  • Both list slides at 100 lbs each
  • The photograph shows full-width bar pulls. Pull material is not stated
  • SW6207B-P lists 5x2 in casters: 2 fixed and 4 swivel with brake
  • The catalog photograph is blue
  • SW6205A packs at 75 pcs/40HQ, SW6207B-P at 50 pcs/40HQ, and the two together at 30 sets/40HQ
  • Neither model is marked knocked down

Wholesale Ordering & MOQ

Factory

SAFEWELL GROUP, Jiashan factory, manufacturing since 1998. 8,000+ employees, 16,000 m², 98.7% on-time delivery. UL, CE, and SGS, plus ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018.

MOQ and mix

Minimum order is one 20GP container. Mixed models are allowed, including carts, chests, and cabinets from this series.

Samples and production

Samples are paid and take about 10 days. Mass production takes about 30 days.

Stock and DDP

Many models are in stock, and single units can be purchased. DDP door-to-door delivery covers the USA, Canada, Europe, Australia, New Zealand, and South America.

Catalog Images

SAFEWELL SW6205A top chest stacked on the SW6207B-P rolling cabinet in blue, with the lid open to the pegboard
SAFEWELL SW6205A top chest stacked on the SW6207B-P rolling cabinet in blue, with the lid open to the pegboard
Detail strip from the stacked SW6205A and SW6207B-P photograph: lid handle, recessed side handle, open side compartment, and a braked caster
Detail strip from the stacked SW6205A and SW6207B-P photograph: lid handle, recessed side handle, open side compartment, and a braked caster

62 Inch Heavy Duty Tool Chest FAQ

How is this 62 inch tool chest different from the XTB6210 work station?

SW6205A is a top chest and SW6207B-P is a rolling cabinet. XTB6210C, XTB6210G, and XTB6210B are mobile work stations with a rubber-wood top, and they stay on the 62 inch heavy duty mobile work station page. Do not substitute one listing for the other. The smaller Heavy Duty chest pages are the 36 inch and 42 inch pages, and the narrow pair is XTB2606 with XTB2707.

What sizes, slides, and casters are published for SW6205A and SW6207B-P?

SW6205A is 61.5W*21.5D*26.7H in (1562*546*678 mm). SW6207B-P is 62W*22D*45.2H in (1575*559*1148 mm). Millimeters are the inch sizes converted to the nearest millimeter. Both list slides at 100 lbs each. Casters are listed only on SW6207B-P: 5x2 in, 2 fixed and 4 swivel with brake. The chest lists 2 gas struts, a pegboard inside the lid, and side handles. The cabinet lists large lower storage and a side compartment. The catalog row for SW6207B-P is titled Tool Chest. It is the bottom cabinet.

What does the photograph show that the table does not count?

The supplied photograph is one stacked view of SW6205A on SW6207B-P, in blue, with the lid open. It shows full-width bar pulls, and this page does not name a pull material. Drawer count is not published, so the table leaves that cell blank rather than counting fronts in the crop. The chest crop includes the lid, the pegboard, and drawer fronts from the stack. The cabinet crop is the lower cabinet with casters, and its top edge still shows chest drawers. The detail strip shows the lid handle, a recessed side handle, the open side compartment, and a braked caster. Steel gauge, unit weight, caster load, and total capacity are not listed.

How do the chest and cabinet pack, and what wholesale terms apply?

SW6205A is 75 pieces per 40HQ, packing size 64.7W*25.4D*33.7H in (1643*645*856 mm). SW6207B-P is 50 pieces per 40HQ, packing size 65.1W*24.8D*48.1H in (1654*630*1222 mm). Together they are 30 sets per 40HQ. Both cartons are larger than the product. Neither model is marked knocked down. The minimum order is one 20GP container, and mixed models are allowed. Paid samples take about 10 days. Mass production takes about 30 days. Many models are in stock, and single units can be purchased. DDP door-to-door delivery covers the USA, Canada, Europe, Australia, New Zealand, and South America. SAFEWELL was founded in 1998, on-time delivery is 98.7%, and the warranty is 2 years.

Request a quote

Include the SKUs on this page, the mix you want in the container, and the delivery country. SAFEWELL will quote from the published sizes and will ask before filling any blank gauge, weight, or load field.

Contact SAFEWELL

Related Wholesale Tool Storage

The 62 inch mobile work station is a different product: XTB6210 models with a rubber-wood top. This page is only the SW6205A chest and SW6207B-P rolling cabinet. Smaller Heavy Duty chest pages keep their own widths.

Heavy Duty Rolling Tool Cabinets

Heavy Duty · HEAVY DUTY

Heavy Duty Rolling Tool Cabinets

XTB2707 rolling cabinet and XTB2606 top chest. Blue. Published widths 26.1–26.9 in. Slides 100 lbs each.

Stainless Steel Work Stations

Heavy Duty · SS430

Stainless Steel Work Stations

SS430 stainless steel and a rubber-wood top. Widths 46, 56, 62, and 72 in: XTB4609BS, XTB5610BS, XTB6210BS, and XTB7215BS.

Industrial Tool Chest and Cabinet

Industrial · INDUSTRIAL

Industrial Tool Chest and Cabinet

TC602608A and TC723010A top chests with rolling cabinets TC602610B and TC723016B. Black with blue pulls. Slides 120 lbs each.

Industrial Mobile Tool Cabinets

Industrial · INDUSTRIAL

Industrial Mobile Tool Cabinets

XTB6109B, XTB7215B, and XTB9624B. Powder-coated black with blue pulls and a wood top. Optional 430 stainless on request.

3 Shelf Utility Carts

Tool Cart · 3 MODELS

3 Shelf Utility Carts

TC301, TC302, and OPE380. Published widths 28.7–29.5 in. TC302 lists one locking drawer. All three ship knocked down.

Tool Carts with Drawers

Tool Cart · 5 MODELS

Tool Carts with Drawers

TC310, TC309, TC292105, TC292106, and TC292107. Published widths 27.8–33.7 in. All five ship knocked down.

Steel Workbenches

Heavy Duty · 3 MODELS

Steel Workbenches

WB600, WB602, and WB602C. Steel tops, black finish, widths 59–59.1 in. All three ship knocked down.

Wood Top Workbenches

Heavy Duty · 7 MODELS

Wood Top Workbenches

Seven wood-top benches. CT-3FT, CT-4FT-GS, CT-5FT, and CT-6FT use adjustable feet. CT-4FT-C, CT-5FT-C, and CT-6FT-C list casters. All ship knocked down.

Hand Crank Workbenches

Heavy Duty · 2 MODELS

Hand Crank Workbenches

WB4824 and WB6024. Hand-crank height adjustment, wooden tops, widths 48–60 in. Height range is not stated. Both ship knocked down.

Workbenches with Pegboard

Heavy Duty · 2 MODELS

Workbenches with Pegboard

WB452202 and XTB5401B. Pegboard back panels, one drawer in each catalog photo, widths 44.7–54 in. Both ship knocked down.

Modular Garage Cabinets

Garage · 9 MODELS

Modular Garage Cabinets

GS2720 modules plus pegboard GS2424S. One tool cart rolls. The side locker, bases, and wall cabinet stay in place. Worktop packing is omitted.

Partial view of the SAFEWELL 132 in garage storage cabinet set. Photo is cropped and does not show the full 132 in set.

Garage · 132 IN

132 in Garage Storage Cabinet Set

Partial view. Photo is cropped and does not show the full 132 in set. 132 in wide, no printed model number. Ships on one wooden pallet, 26 sets per 40HQ.

WP Garage Cabinets

Garage · 5 MODELS

WP Garage Cabinets

Five WP models. Two side lockers and the wall cabinet do not roll. GS281801WP and GS281832WP are the rolling cabinets. Knockdown is not stated.

Miter Saw Stands

Saw Stand · 4 MODELS

Miter Saw Stands

MSS500, MSS502, MSS507, and MSS2400. Photos show four legs and no wheels. Published widths 39.8–54.4 in.

Rolling Miter Saw Stands

Saw Stand · 4 MODELS

Rolling Miter Saw Stands

MSS508A, MSS509, MSS250, and MSS510. Photos show wheels. Confirm MSS508A dimensions on request. Other published widths are 42.1–57.7 in.

SAFEWELL SH106 saw horse, a complete silver-tone horse

Saw Stand · HORSE + BRACKET

Saw Horse and Brackets

SH106 is the complete saw horse, 33.5 in wide, 4580 pcs/40HQ. SH107 is a sawhorse bracket accessory with no published size.

SAFEWELL AC43 support stand with a cylindrical roller head, one of three head types

Saw Stand · 3 HEADS

Workpiece Support Stands

AC41C flat top, height 27~43 in, 864 sets/40HQ. AC42 multi-ball head, printed height 19.3 in, 1600 pcs/40HQ. AC43 cylindrical roller, printed height 43.5 in, 2100 pcs/40HQ.