Search for a steel shop workbench and you will see as many DIY build plans as product pages. Building one can make sense if you already weld, have time, and do not need a published load rating or a packed unit that can ship as freight. For most shops the better question is whether a manufactured bench has the load, the top and the storage you need, and what it costs delivered to your door.
This is a buying comparison, not a weld-it-yourself plan. Every size, load and finish below is taken from a live SAFEWELL product page. Where a figure is missing, the article says so and tells you to ask us.
Quick comparison: steel shop workbenches from SAFEWELL
Main shop benches from the current catalog. Blank cells are not on the product page; ask us for those figures.
| Model | Size (W×D×H) | Top and storage | Mobility and locks | Published load | Net / gross |
|---|---|---|---|---|---|
| TWA7925002 | 2000×640×867 mm | 2000 mm worktop (material not named); double-layer open storage | Casters/feet not listed | Not listed | 89 / 95 kg |
| TWA7925031 | 2000×640×867 mm | 2000 mm worktop (material not named); 3 drawers plus open bottom shelf | Individual key locks; casters/feet not listed | Not listed | 84 / 89 kg |
| TWA6031001 | 1525×780×855 mm | Open single-layer storage; SPCC steel frame | Levelling adjusters (fixed) | Not listed | 64 / 70 kg |
| WB600 | 1500×642×930 mm (59×25.3×36.6 in) | Raised-edge steel top, lower shelf, no drawers | Adjustable feet | Not listed | Not listed |
| WB602 | 1500×642×860 mm (59×25.3×33.9 in) | Steel top, 2 drawers, lower shelf | Adjustable feet | Not listed | Not listed |
| CT-5FT | 1524×559×985 mm (60×22×38.7 in) | 30 mm rubber-wood top, no drawers | Adjustable feet | Max 1,800 lb | Not listed |
| LZ002-01 | 1633×660×1180 mm | 25 mm black density board; 13 drawers | 6 in silent rubber swivel casters, 2 with brakes; tubular lock and ABA lock | 660 kg | 240 / 310 kg |
The WB602C is the same 59-inch steel family with casters, but the caster size is not published. The CT caster models list a maximum of 1,300 lb, one drawer on ball-bearing slides, and 5×2 in casters, all four swivel with a brake. If the bench must move under load, start on the mobile workbench page rather than converting a fixed bench after the fact.
1. Buy vs. build
A shop-built steel bench can be cut to the width of your wall. What it usually does not give you is a published load rating, a consistent powder-coat finish, or a carton size that a freight company can book.
A manufactured steel shop workbench trades that freedom for numbers you can check. SAFEWELL publishes product size, packing size and, on some models, net weight, load and container quantity. The WB steel series and the CT wood-top series are listed as shipping knocked down for assembly to the published size, which matters if the bench has to go through a standard door.
Build your own if the bench is a one-off and a missing load rating does not matter. Buy one if you need a repeatable model, a finish that matches the rest of the shop, or a landed price to a door. A width, color or drawer layout that is not on the page is an OEM/ODM request, not a reason to start cutting steel in the aisle.
2. Load: use a published number, or ask
Load is the first spec that should decide a steel shop workbench, and it is the spec most product pages leave out.
On the current SAFEWELL listings, a published total load appears on the CT wood-top benches (maximum 1,800 lb on the models that stand on adjustable feet; maximum 1,300 lb on the caster models) and on the LZ002-01 (660 kg). The catalog does not split the CT figure into a worktop rating and a per-drawer rating. The TWA7925002, TWA7925031, TWA6031001 and WB600 / WB602 / WB602C pages do not publish a load at all.
Do not estimate a load from the empty weight. A TWA7925002 has a published net weight of 89 kg; that tells you how heavy the bench is to move, not what you can park on it. If the page does not print a total capacity, ask us for the rating, and ask whether it is a static load on the top, a combined load including the shelf or drawers, or both. Steel gauge is also missing from the WB and CT catalog pages. The TWA6031001 lists an SPCC steel frame; the two-meter TWA pages describe a heavy-duty steel frame but do not name a grade or thickness. If gauge matters to your bid, ask for it with the load.
3. Top material: steel, rubber-wood or density board
The frame can be steel and the top can still be something else. Read both.
The WB600 lists a raised-edge steel top. That is the straightforward steel shop workbench surface: oil, chips and a dropped socket stay on the bench instead of rolling onto the floor. The WB602 and WB602C are the same steel family; the page describes a steel top but does not repeat the raised-edge wording, so confirm the edge profile if you need it.
The CT series uses a 30 mm rubber-wood top on a black steel frame, in 36, 48, 60 and 72 inch widths. Catalog photos also show a power module on the apron, but the listing does not give an outlet count or electrical rating, so those details have to be confirmed. SAFEWELL power modules are UL and CE certified; we will not attach those marks to a module whose rating is not on the page.
The LZ002-01 uses a 25 mm black density board worktop on a 13-drawer mobile body. That is a work surface on a rolling cabinet, not a simple open bench, and it is compared with other rolling benches on the mobile workbench page.
The two-meter TWA7925002 and TWA7925031 both list a 2000 mm worktop but do not name the top material. Treat that as a question for the quote, not as an assumption that the top is steel.

4. Drawers versus open shelves
Decide what has to live at the bench, then pick the storage, not the other way around.
Open storage is faster when you want bulky items in reach and you are not trying to lock them. The TWA7925002 is a 2000 mm bench with a double-layer open design and a safety-red powder coat. The TWA6031001 is a shorter 1525 mm bench with a single open layer, levelling adjusters and the same safety-red finish, listed as SPCC steel. The WB600 puts a lower shelf under a raised-edge steel top and has no drawers.
Drawers are worth it when hand tools should be sorted or locked at the station. The TWA7925031 keeps the same 2000×640×867 mm footprint as the TWA7925002, then adds three drawers with individual key locks and an open bottom shelf, in an industrial-blue powder coat. The WB602 is a 59-inch steel bench with two drawers and a lower shelf. The mobile CT models add a single drawer on ball-bearing slides; a separate pound rating for that drawer is not listed.
If you need a full column of drawers under a worktop, you are no longer shopping for a simple shop bench. The LZ002-01 has 13 drawers, 100 lb / 150 lb self-locking ball-bearing slides, a 660 kg total capacity and 6-inch casters. That layout belongs with the mobile workbench range. Pegboard back panels and full-height workstations are a different buying problem and are not covered here.

5. Footprint, height and whether the bench should roll
Published widths in this comparison run from 36 inches on the CT-3FT to 2000 mm on the two TWA benches. Depths run from 458 mm on the smallest wood-top bench to 780 mm on the TWA6031001. Working height on the fixed benches sits roughly between 847 mm (WB602C) and 985 mm (CT-5FT and CT-6FT). The LZ002-01 is taller, at 1180 mm, because of the drawer body under the top. The WB series notes seated or upright use; a published seated height range is not given, so ask if that matters.
A fixed bench should sit flat. The TWA6031001, the WB models and the non-caster CT models list levelling or adjustable feet for uneven floors. The TWA7925002 and TWA7925031 do not list casters or feet, so mobility and levelling should be confirmed on the quote rather than assumed.
If the bench has to move, do not improvise. The CT caster models publish 5×2 in casters, all four swivel with a brake, and drop the published load from 1,800 lb to 1,300 lb. The LZ002-01 publishes 6-inch silent rubber swivel casters, two of them with brakes. The WB602C lists casters but not the size. For benches that are meant to roll, use the mobile workbench page.
6. Steel shop workbench buying checklist
Before you request a price, write down the space you have; the top material and whether you need a raised edge; the total load on the top, shelf and drawers (ask if it is not published); open shelves or drawers and any locks; feet or casters, with a caster size if it must roll; the finish; whether it ships knocked down; and your full delivery address so a DDP price can be confirmed.
Buying one steel shop workbench for your own shop
You do not need to be a distributor to buy from us. Many SAFEWELL models are in stock and sold as single units.
We ship DDP (delivered duty paid) to the USA, Canada, Europe, Australia, New Zealand and South America. We handle the international freight, customs clearance and import duties, and the bench is delivered to your door.
To get a delivered price, contact us with the model you want (or a short description of your space and work), your full delivery address so we can confirm DDP is available there, and any open specs such as load, worktop material, feet or caster size. We confirm the address and the price before you pay.
Selling steel shop workbenches: wholesale, dropshipping and private label
If you sell workshop equipment, three routes are available.
Wholesale. Our standard MOQ is one 20GP container, and you can mix different models in that container, including workbenches next to tool chests and carts. Small trial orders are also accepted. Published 40HQ quantities on the knocked-down benches are high: 225 pieces for the WB600, 240 for the WB602, and 308 for the CT-5FT. Ask us for a 20GP loading plan for the mix you actually want.
One-piece dropshipping. You list SAFEWELL benches in your store. When a customer orders, we ship that single unit DDP directly to your customer's door in the same regions. You hold no inventory and handle no customs paperwork.
OEM/ODM private label. Put your brand on a proven platform, or change color, logo, packing and, where the platform allows it, drawers or mobility. The OEM/ODM page and the workbench manufacturer page describe how that process starts. Samples are paid and take about 10 days. Mass production takes about 30 days after sample approval. Client brands are kept confidential.
FAQ
Should I buy or build a steel shop workbench? Build one if you already have the tools and time, and a missing load rating does not matter. Buy a manufactured bench if you want a known size, a powder-coat finish, freight packing, and a DDP quote. Custom sizes belong in an OEM conversation, not a weekend build.
What load rating should a steel shop workbench have? Use a published total load, not a guess from the empty weight. The CT wood-top benches list a maximum of 1,800 lb on adjustable feet and 1,300 lb on casters; the LZ002-01 lists 660 kg. The TWA7925002, TWA7925031, TWA6031001 and WB600/WB602/WB602C pages do not publish a load, so ask us before you order.
Is a steel top better than a wood top? It depends on the work. A raised-edge steel top, as on the WB600, suits oily or hot work. A 30 mm rubber-wood top, as on the CT series, is a common assembly surface. The 2-meter TWA benches list a 2000 mm worktop but do not name the material, so ask us to confirm it.
Do I need drawers on a steel shop workbench? Only if you want tools locked or sorted at the bench. An open lower shelf, as on the TWA7925002, TWA6031001 and WB600, is faster for bulky items. The TWA7925031 adds three drawers with individual key locks plus an open shelf; the WB602 has two drawers. For a full drawer column, see the 13-drawer LZ002-01 on the mobile workbench page.
Do SAFEWELL workbenches ship assembled? The WB steel series and the CT wood-top series ship knocked down for assembly to the published size. The TWA7925002 packing height is 125 mm against an assembled height of 867 mm, which is a flat pack, but the page does not use the words knocked down, so ask us to confirm assembly on that series.
Can I buy a single steel shop workbench with door delivery? Yes. Many SAFEWELL models are in stock and sold as single units, shipped DDP to the USA, Canada, Europe, Australia, New Zealand and South America. Send your full delivery address so we can confirm DDP for that location.
Can I sell SAFEWELL workbenches under my own brand or through dropshipping? Yes. We support wholesale, one-piece dropshipping with DDP delivery to your customers, and OEM/ODM private label. The standard MOQ is one 20GP container that can mix models, and small trial orders are accepted. Samples are paid and take about 10 days; mass production takes about 30 days.
Sources
- SAFEWELL mobile workbench comparison page
- TWA7925002 Double-Layer Industrial Workbench
- TWA7925031 3-Drawer Drawer Storage Workbench
- TWA6031001 Single-Layer Storage Workbench
- Steel workbench catalog (WB600, WB602, WB602C)
- Wood top workbench catalog (CT series)
- LZ002-01 Industrial Mobile Workbench
- SAFEWELL workbench manufacturer page
- SAFEWELL OEM/ODM page
Related Reading
Continue with a few closely related product, OEM, and comparison pages.
- Tool Storage Product Range - Compare tool cabinet, tool cart, and modular storage options.
- OEM/ODM Program Overview - Review manufacturing workflow, sampling, and quality checkpoints.
- Heavy Duty Tool Chest Buying Guide: Capacity, Drawers, Power and How to Get One Delivered - Read another related article from SAFEWELL News.
- Rolling Tool Chest with Drawers: How Many Drawers and Which Layout You Actually Need - Read another related article from SAFEWELL News.
Why SAFEWELL
- Since 1998: a 16,000 m² factory with more than 8,000 employees. Equipment and inspection gates are documented on the tool cabinet manufacturer page. Workbench programs are briefed on the workbench manufacturer page.
- 98.7% on-time delivery record.
- Certifications: UL, CE and SGS, and ISO 9001, ISO 14001 and ISO 45001. Our power modules are UL and CE certified.
- Full range: workbenches, rolling tool cabinets, tool chests and tool carts, so a shop package can come from one supplier.
Tell us whether you are buying one bench or stocking a line for resale, and we will recommend a model and send a price. If a load, top material or caster size is not on the page, we will confirm it in the same reply.
Ask for a TWA7925031 price · Compare mobile workbenches · Start an OEM/ODM project · Contact us
Prepared by SAFEWELL Industrial Content Team.